• Issued: June 2006

In addition to recognizing activities of trades listed in “ANNEXE C” of Règlement sur la formation professionelle de la main-d’oeuvre dans l’industrie de la construction [R-20, r. 6.2], Quebec will recognize an Ontario Trade Activity Card for the following activities of trades:

1. Trades with activities that are part of the carpentry trade as well as being stand-alone trades.

Drywall, Acoustic and Lathing Applicator: (Part of Carpentry--interior finishing)

  • Installation of drywall
  • Installation of lath
  • Installation of thermal and sound insulation

Floor Covering Installer: (Part of carpentry--parquet flooring)

  • Installation and repair of carpet & pads
  • Installation and repair of wood floors

General Carpenter:   

  • Framing
  • Building stairs           

Glazier: (Part of carpentry for most activities excluding curtain walls)

  • Installation of curtain wall systems 

Roofer: (Part of carpentry: framing--installation of trusses, dormers, roof coverings)

  • Retrofit, repair and resurface
  • Installation of single-ply roofing

Taper and Plasterer: (Part of carpentry: interior finishing)

  • Installation of cornices (hand-made or pre-fab) and ornamental plaster moulds

2. Trades with some activities in Schedule “C” of R-20

Painter and Decorator:

  • Brush and roll painting
  • Spray painting surfaces
  • Hanging wall coverings

3. Trades with no activities in Schedule “C”

Brick and Stone Mason:

  • Laying of concrete blocks
  • Building/repairing chimneys
  • Building/repairing fireplaces
  • Installation of prefabricated masonry panels

Cement mason:

  • Concrete finishing
  • Waterproofing & restoration prep work

Cement Finisher or Bricklayer:

  • Grouting
  • Sandblasting

Terrazzo, Tile and Marble Craft:

  • Installation of tiles
  • Installation of terrazzo
  • Installation of marble and granite indoor

Heavy Equipment Operator: 

  • Tractor Loader Backhoe Operator
  • Dozer Operator
Note: Activities of trades listed in Appendix 3 may be part of a different trade in Quebec.

4. Schedule “C” of R-20, Activities of Trades

1. Carpenter-joiner

  • Forms
  • Installation of doors and windows
  • Parquet flooring
  • Installation of prefabricated coverings
  • Installation of cupboards and other workshop prepared or manufactured items
  • Installation of gypsum board
  • Installation of piles

2. Tinsmith

  • Installation of gutters
  • Installation of prefabricated coverings

3. Painter

  • Pointing and filling joints  (gypsum board)

4. Plasterer

  • Pointing and filling joints (gypsum board)

5. Interior Systems Installer

  • Installation of gypsum board

Previous | Next